Stagnant indoor air can quickly be contaminated with pollutants like dust, mold, pollen and even carbon monoxide. A heat or energy recovery ventilator can remedy this potentially unhealthy situation - and help lower your utility bills.

In this video: An expert in indoor air quality discusses the importance of proper ventilation and ways to circulate the air in your home.

Why it's important

As you tighten up your home with insulation, weatherizing and even duct sealing, fresh air becomes a big concern - sealing up all those air leaks also prevents outside air from entering your home.

Indoor air quality experts say the air inside your home should be "exchanged" with outside air a minimum of eight times in a 24-hour period. But the average home has only five - or fewer - air exchanges in a day. In a poorly-ventilated house, the air inside may be more health-threatening than living in a smog-infested urban area!

How it works

Unlike other mechanical ventilation systems like your bathroom vent fan or kitchen range hood, an energy recovery ventilator not only gets rid of air inside your home, it replaces it with fresh outdoor air.

As the indoor air is sent outside, a heat exchanger inside the ventilator extracts the warmth and uses it to pre-heat the incoming fresh air before it reaches your furnace. During the summer, the heat exchanger works in reverse to expel heat from the incoming air as it heads toward your air conditioner.

An energy recovery ventilator, which also regulates humidity levels, can be connected to most forced-air heating systems. Similar systems called heat recovery ventilators with no humidity control are also available.

The benefits

One of the biggest selling points of a high-efficiency ventilation system is energy savings. Up to 85 percent of the heat from the exhaust air can be recovered and reused, significantly reducing the demand on your furnace. And like a geothermal heat pump, the system works in reverse during the summer, eliminating unwanted heat and humidity.

According to manufacturers, an energy recovery ventilator uses only 100-200 watts of electricity per hour - compared to the 2,000 to 4,000 watts you can save by building an energy-tight home.

Another important advantage - but one that might go unnoticed - is a healthy balance of air exchanges. The system, which can be combined with a high-efficiency air cleaner, is very effective at expelling indoor air pollutants.

And because it draws in fresh air at the same time, it won't create a vacuum effect from uneven air pressure - a situation which can draw in radon gas from the soil, create moisture problems and cause problems with gas appliances.

Other benefits include:

  • Quiet operation from a single unit contained in an isolated area
  • Humidity control (with an energy recovery system)
  • Low maintenance and long lifespan

The cost

The cost for installing an energy recovery ventilation system in a typical Midwest home will range from $2,000 to $4,000, depending on the type of ductwork and heating system in your home.

Keep in mind that the energy savings you'll realize will help offset that investment. Your heating contractor can help you determine how much energy you'll save and how long it will take to pay back the initial cost.

While most ventilation systems are included during construction of new home, they can also be added existing homes. Contractors should perform a blower door test to analyze air flow through the home before making a recommendation.

More from this category

Controlling the humidity

Man reading newspaper near fireplace

An automatic whole-house humidifier connected to your existing heating system can provide continuous, no-maintenance moisture control.

learn more

Assessing your indoor air quality

Man installing an air filter

Many newer homes have poor ventilation. This stagnant environment can cause indoor air quality problems - sometimes called "sick house syndrome."

learn more

Air filtering and cleaning

Man inserting an air filter

Proper filtering and/or cleaning of the air we breathe can help with allergies, asthma or other respiratory problems.

learn more

Sealing ductwork

Man applying mastic tape to ductwork

Leaky ductwork is one of the most common household problems. Luckily, it's easy to fix with the right materials.

learn more

Replacing ventilation fans

Replacing a ventilation fan

Don’t tear up your ceiling to replace a bad ventilation fan.  We’ll show you how to easily switch it out for an energy efficient fan.

learn more

Cleaning your ductwork

Professional duct cleaner with tube

Cleaning dust and debris out of your ductwork will help you breathe easier.

learn more

Sealing leaks and ventilation

Man showing insulation material

Have you heard the myth that it is possible to make your home too tight? Find out how you can seal up all the air leaks and keep your home safe at the same time.

learn more