Insulation Options

Insulation types

In this video: Find out about the different types of insulation that are available and the benefits of each.

Insulating an older home

In this video: On this 1950s ranch home, insulation was installed on the exterior, interior and attic. Find out what insulation was chosen to increase the efficiency of this home and why.

Insulate with recycled newspaper

In this video: Cellulose insulation is an insulation option for your home. It is blown in to provide insulation, a sound barrier and seals the wall cavity.

Types of insulation

Fiberglass is the most common type of insulation. It's made from molten glass spun into microfibers. It's usually pink or yellow and comes in the form of batts or rolled blankets.
Rock wool is literally made from rock - it's manufactured similar to fiberglass, but with molten rock instead of glass. The gray or brown fibers come in batts or blankets, or as shredded loose-fill.
Cellulose is made from shredded recycled paper, such as newsprint or cardboard. It's treated with chemicals to make it fire- and insect-resistant, and is applied as loose-fill or wet-sprayed through a machine.
Synthetic insulation, usually polystyrene or polyurethane foam, is commonly used in rigid boards for insulating basements, cathedral ceilings or sidewalls.

Spray foam insulation

Spray-on insulation is made of polyurethane foam – the same kind of insulation appliance manufacturers have used in refrigerators and water heaters for years. The liquid polyurethane is pumped through pressurized spray nozzles – as it lands on the surface of your attic or side walls, it expands to form a continuous insulating barrier.

Unlike traditional insulating materials like fiberglass or cellulose, spray foam insulation can seal and fill all the tiny cracks and seams you might not even see. The seamless material virtually eliminates energy-wasting air filtration.

In addition, polyurethane has the highest R-value for any given thickness compared to other insulation products. Because it provides a higher R-value per inch, homeowners using foam insulation can use 2x4 construction on exterior walls instead of the 2x6 studs required with traditional insulation. Foam insulation also helps control moisture condensation, it won’t shrink or settle, and it’s fire- and insect-resistant.

Spray foam insulation is not a do-it-yourself project – you’ll need to hire a contractor certified in applying this new technology. It’s also a messy process, so it’s better for new construction rather than existing homes. And using foam insulation in sidewalls may cause difficulties or delays if electrical and plumbing contractors aren’t familiar working around it.

The initial cost of using spray foam insulation runs about three times more than traditional materials. But keep in mind that the increase in R-value and air sealing will lower your utility bills by 30 percent - paying back the cost difference in energy savings in less than five years.

Learn more about spray foam insulation